DIY Personalized Beach Pails

At a relatively cheap price, you can create these personalized pails. They make great end of the year gifts for students or favors for birthday parties. The personalization is an easy and quick way to kick them up a notch. 

Supplies

• Pails : The one used below came from the 99 cents store for $1.49. There is no reason to spend more. A plastic pail is a plastic pail. 
• Elmer's Painters: I purchased these on Ebay in assorted colors. All craft stores sell them. 

* Keep wet and dry paper towels around to clean up mistakes. If you make a mistake (like I did) you can wipe off the paint right away and start over. 

I gave these out to my second graders right before summer vacation. On each pail, I wrote the 

student's name and drew a picture. My co-teacher and I also filled the pails with books, and candy. The kids were so excited.

Back to School: DIY Personalized Pencil Case

September is just around the corner and back to school sales have already started. This is a tutorial for a personalized pencil case. There's not much to this really. Once you have your supplies- you draw. That's it.

 

Supplies:

• A plastic pencil case. This one was from Staples.
• Elmer's Painters paint markers in assorted colors.

*Keep wet and dry paper towels close by. If you make a mistake with the paint marker, it will easily wipe off while it's still wet.

 

 

Step 1: Use your paint markers to draw a design. I chose a character from Frozen. I recommend googling simple pictures of your idea as a guide. Once you choose your image - keep it close by for reference. This part will take you the longest. As seen in the picture, paint your lightest colors first and let dry before layering other colors on top. It takes a few minutes to dry completely.

Step 2: Write the name. This was tricky for me. The middle part of this pencil case had a glossy finish and some of my paint markers did not hold very well. I wiped them off, and tried another, eventually going with white.

Step 3: Decorate the rest of the box. I used super simple snowflakes. (intersecting lines)

Finished Product

 

 

DIY Cupcake Toppers: Part 2: Assembly

Hello! This is part two of the cupcake topper tutorial. Here I will show you how to assemble the toppers you created in Part 1.

Supplies

• Your printed designs from Part 1
• Circle paper punch 1 3/8"
• Scallop paper punch 2"
• Glue
• Scissor
• Toothpicks
• Construction paper or scrapbooking paper.

Step 1: Cut out everything. Using the circle paper punch, punch out your designs upside down. This provides more control when centering. Then punch out the scalloped circles. You will need 2 of these for each topper, and punch out any decorations you might use. Here I used Martha Stewart's ribbon bow punch.

Step 2: Glue your design onto the scalloped circle.

Step 3: Add glue and glue on your toothpick. Then use another scalloped circle to seal it making sure the two scalloped punches line up exactly. This will seal in/hide the toothpick and make your cupcake topper look pretty from any point of view.

If you have any questions, please comment below.

DIY Cupcake Toppers: Part 1

This is a tutorial for how-to create cupcake toppers for a celebration. You will learn how to use your computer to create the correct size and shaped text to be used to tailor make cupcake toppers for any occasion. These can be used for any holiday or celebration because you create the text or images you want. 

Supplies:

Part 1:

• Your computer & printer
• Microsoft Word
• White paper or cardstock.

Part 2 ( Coming Soon)

• Circle paper punch 1 3/8'
• Scallop paper punch 2'
• Glue
• Scissor
• Toothpicks
• Construction paper or scrapbooking paper.

 Step 1: Open Up a Microsoft Word Document. Click on Insert> Shape> and click on the oval shape. Then move to your screen and click and draw your shape. 

Step 2: Adjust the size to fit your paper punch. My circle punch was 1 3/8 so I changed the diameter of the circle to be 1.45. This way, I can guarentee that I won't see the outline, but the text will be visible after it is cut out.

Our Wedding Favors: Personalized Hot Cocoa & Mugs

(Photo by Adeline Ramos for George Street Photo)

Hot Cocoa Packets & Whisks

 We ordered these for our guests. They come packaged as blank white packages with sheets of personalized label stickers. I did not know this when I ordered them, but it really didn't take much time to do. The stickers were also thick enough that if I made a mistake and put the label on in the wrong spot, I could peel it off and try again without ripping it. We ordered the whisks on the side and planned on giving out those two as favors.

That was until my mom came across the personalized mugs.

Personalized Mugs

We ordered our mugs from this website. It was the only option I found that was affordable and I spent hours looking. When you place your order, they warn you that some may break during shipping. We ordered extra to be on the safe side, but every single mug arrived safe and sound.

I picked up some plastic gift bags and rolls of purple ribbon at the Dollar Tree and recruited help. We spent about 2 hours adding the stickers to the cocoa packets, filling each mug with the cocoa and whisk, and tying bows to each favor.

Questions? Comment.

DIY Wedding Date Banner & Our Engagement Shoot

We had a long engagement. We were saving and we were planning. During that time I somehow convinced my husband to take professional engagement pictures as part of my birthday present. Of course that meant figuring out what to wear, how to do my makeup and hair, and what props to bring. One idea I came across was a wedding date banner. These are usually used for Save the Date annoucements. They seemed simple enough and here is how I made the one seen in our picture above. 

Supplies:

• White cardstock or coverstock. (Regular printer paper will not do, the numbers will flip over with the slightest wind.)
• Your computer & printer
• Optional- Heart paper punch ( I used one by Mary Uchida for the one above, and cut it out by hand in the pictures seen below.)
• Red construction paper
• Ribbon
• Hole puncher. The one I used creates slits instead of circles and is by Fishkars
• Tape
• Glue

Part 1: Computer Time

Step 1: Open up a powerpoint document. Microsoft Word or any word processor will also work. I find it easier to move around text inside powerpoint. Click Insert>Text Box and choose the rectangle shape.

Step 2:Then click on your workshape and hold down the mouse to create a shape. Next adjust the size on the top right. You can make this any size you want. Here I did 4x4. 

Step 3: Unless you want a blue banner, change the color. Click on shape fill and adjust. Then shape outline and adjust. I like to make the shape outline a light/medium gray. This ensures that it is dark enough to see when I have to cut it out, but light enough that if I make a mistake or a little bit of the trim shows, it won't show up in photos. 

Step 4: Add your numbers. Click Insert>Text Box. Then click inside your square. Type in one number from your date. Adjust your font, color, and size. Here I used Imprint MT Shadow which came standard on the computer in size 250. 

Step 5: Use your mouse to click outside of your text and shape and draw it over all of your work. Hold onto the mouse button the whole time. When you're finished the shape will be hilighted. Now you're going to click copy, or Ctrl-C. Then click paste or Ctrl-P and move your duplicated work to a spot close by but not covering your work. I like to line up the shapes exactly. This makes cutting them out quicker. Repeat this step until you have enough squares for your entire date and the hearts. I needed 12. This required 3 additional pages (slides), as I only fit 3 on a page.

Step 6: Click in each box, erase the number, and write in the numbers you need. I leave 2 blank for the hearts. When I first tried to print the heart picture, the color of my printer just wasn't bright enough. You could paste a picture of a heart from the internet or use the shape tool you used the create the square to make the heart if you choose. 

Step 7: Print it out ON CARDSTOCK.

Part 2: Assembly

Step 1: Cut out all your numbers using the squares as your guide. 

Step 2: Using your hole puncher, punch 2 holes along the top of each number.

Step 3: Cut out and glue your hearts onto the paper or draw them. 

 Step 4: Thread your ribbon through the holes of each square. Make sure they are in the correct order!

Step 5: Center your numbers on the ribbon making sure there is enough extra on both ends for you to hold or suspend. Once everything is correctly positioned, use tape to hold down the ribbon on the back side of each square. This will help the numbers from sliding behind each other. 

Done.

Other pictures from our shoot. 

It started raining.

* The photos from our shoot were captured by the talented Adeline Ramos for George Street Photo* 

DIY Better Gift/Favor Tags

Hi, My name is Jen and I procrastinate on a professional level. When it comes to gift wrapping, I usually wait until the night before or the day of the event to wrap the gift. The only exception is Christmas where due to the sheer volume of gifts, I wrap as I buy. 

Laziness Being busy has also introduced me to gift bags. You throw in your items, add a little tissue paper, and you're done. I can't tell you how many times, in my last minute wrapping, I have noticed that the gift bag I had purchased did not have a tag. Sometimes you can get away with that. If it is a party for one person and you can just write in the card and slip that inside the bag. However, for an occasion like Christmas, where you have multiple gift recipients, it can be confusing and near impossible to remember which freshly wrapped gift goes to your sister, uncle, nephew etc. without tearing it apart or shaking it to mere destruction. 

When wrapping an actual present, I rarely have labels available. When this occurs, I am so happy that I am deeply obsessed with paper punches. They have saved the day and in my opinion are worth the price. They come in all shapes and designs from basic circles and squares to intricate and downright lovely. Below is a tutorial for personalized gift tags that can be used for any occasion depending on your tools or creative bravery. They also work great for birthday party, bridal shower, or baby shower favors. 

Supplies: 

These are the tools I used. I did leave out the stroller punch. If you're interested it is by Fiskars.

• Tag cutout. ( To be honest, you can cut out a rectangle by hand, or purchase tags from Staples or any craft store.)
• Paper punches to suit your occasion. (Various etsy sellers also sell the punched out shapes for around $1. This is great if you need only a few designs- such as for baby shower, or birthday party favors and don't want to spend the $5-$25 for the punch or if it is discontinued)
• Martha Stewart: Diamond Ring
• Martha Stewart: Bow Punch
• EK Success: Square Punch
• Mary Uchida: Tag Punch
• Glue stick
• Markers ( if you want to write names, sentiments, etc)
• Thick Cardstock-Like paper ** I used unlined index cards which is cheaper**
• A hole puncher 

Step 1: Cut out your tags. (Skip this is you purchased them or cut them out yourself.)

Step 2: Cut out your designs. You can either punch directly into the tag utilizing the negative space, or glue on your design. 

Step 3: Add writing if desired. 

Step 4: Punch a hole in the top of your tag with a hole puncher. This is only necessary if you are attaching with a string. You can also just tape it to your gift/favor.

 Step 5: Attach your tag to your gift or favor.

Any questions? Comment.